Volcano Box (Paquete con 2 cables + 32 Pin Finder Adapter Cables)

Producto nº: AD149
Precio sin IVA: $1.404,96
Precio (IVA incluido).: $1.700,00
Disponibilidad: En existencia

 

Features
  • + Easier to use
  • + More powerful
  • + Internal powerful CPLD
Volcano Box Description:
The Volcano Box is more powerful, easier to use, and more indispensable than ever. It achieves to pull up/down any resistor, this performs important role when detecting USB definition.
VolcanoBox...Ahead of All
While everyone else was busy trying to keep up with FuriousGold, a new product is created to make FuriousGold more powerful, easier to use and more indispensable than ever, which is Volcano Box.

Digital resistance
It achieves to pull up/down any resistor, this performs important role when detecting USB definition. It can analyze the accurate resistance value of USB D+pinout this to define USB definition precisely. At the same time, the functions of connector GND and VCC are accurate too. The box can detect phone connector GND and VCC accurately even without power supply from clippers, which means to realize detection and phone read/write possible when phone connector has VCC and GND definition at the same time without clippers. This is exclusively on Volcano. It's impossible to collect and analyze analog data when there is no digital resistance.

Completely GND and VCC control functions
After years of practice, we found out that box would have problems of no GND and VCC hardware design. Because many phones can't work normally without GND and VCC, especially for MStar CPU phones. If you cannot find phone's charger-pin accurately and set VCC definition to it, phone will not respond to read/write operation at all. When setting higher level to general SCM can only provide the current of 20mA. Firstly, there is no way to find out phone charger-pin; Secondly even when you know charger-pin and set it to higher level, phone will directly reduce it because of heavy current, as a result, it fails to play the role of higher level as well as abnormal of phone detection/read/write operaitons. ALl these experience has been proved and tested over years. Volcano's upper panel controls phone connector GND and VCC, which ensures phone to work normally and coordinate with box software analysis to detect charger-pin accuately. This function can be used to produce phone charger cable too. Other box can't provide standing current over 30mA for they only have one PCB panel. MStar CPU phones are difficult to achieve read and write on other boxes.

Set pull up/down to any pinout
You can set any pinout up/down with a variable resistance value. Lots of dead phones TX connector is OC portal, which means higher level is open-collector, it will output lower level if you don't set pull-up resistor to TX. Volcano Boxcontrols flexible pull-up resistor value by changing the resistance. For example, some OM CPU phones can't read/write normally if you do not set 5-10K pull-up resistor. Many other phones can't detect or read/write without this functions. This is exclusively on Volcano and no other box has this function.

Selects resistor value from 390 ohm -800K
Short two pins with resistor function can realize phone enter downloading mode, or other special purposes. This is exclusively on Volcano and no other box has this function.

Eagle Eye
Eagleeye is used for measurements of current. Its built-in analog metter and digital. It can show you how much milliampere mobile using. This is exclusively on Volcano and no other box has this function.

Internal powerful CPLD
Its internal powerful CPLD provides filtered signal output. All the high frequency interference pulse has no access to phone nor to computer, thus it ensures no wrong interference between phone and computer, to make it work more stable. Meanwhile, CPLD also offers more powerful driving abiliry as well as a wider tange of voltage, making read/write to a higher rate of success. It will e very worse if box has no CPLD like read/write stability, immunity and driving ability etc.
Better software and hardware protected designThis ensures heavy output current from hardware design, but also guarantees it will not burn-out box or phone. That is because instant software current real-time monitoring as a watchdog protection, long time protection of thermal relay and over current resistance protection ensure the output current can be staibilzed 500mA but never over 700mA. Each pin has been designed for overvoltage protection and negative pressure protection. This is exclusively on Volcano and no other box has this function.

With a more reasonable USB pathway design
Volcano core IC on-resistance value is only 3 ohm while other box uses more than dozens of ohm. Excessive access of resistance will inevitable cause phone USB work unstably or even not work completely. Other box uses excessive resistance will not support some phones read/write and this is confirmed by the practice already.

Test battery
This function is used to have schematics for making your own cables for customers. For exmaple, make chargers, earphone cables etc. THis is exclusively on Volcano and no other box has this function.
 
  CPU Type Flash Type
MTK MTK6217
MTK6218
MTK6219
MTK6223
MTK6225
MTK6226
MTK6227
MTK6228
MTK6229
MTK6230
MTK6235
MTK6238
MTK6239
MTK6268
MTK6516
MTK6573
MTK6250/52
MTK6253
NOR
NOR
NOR
NOR
NOR
NOR
NOR
NAND
NOR+NAND
NOR+NAND
NANDNAND
NAND
NAND
NAND
NAND
NOR
NOR
SPD SC6600D
SC6600M
SC6600E
SC6600I
SC6600L1
SC6600L2
SC6600L3
SC6600RT
WT6226A
SC6600R
SC6600H
SC6800
SC8800D
SC8800S
SC6600R2
SC6600H3
WT6228
SC6610/20
SC8800H
NOR
NOR+NAND
NOR+NAND
NOR+NAND
NOR
NOR
NOR
NOR
NOR
NOR+NAND
NOR
NAND
NAND
NAND
NOR
NOR
NOR
NOR
MSTAR MSW8533
MSW8533C
MSW8528
MSW8535
MSW8538
MSN8533N
MSN8533D
NOR
NOR
NOR
NOR+NAND
NOR+NAND
NOR+NAND
NOR+NAND
Infineon 7870
7880
7890
7900
NOR
NOR
NOR
NOR
Philips OM6357
OM5212
OM5230
OM5231
NOR
NOR
NOR
NOR
ADI AD6522
AD6525
AD6527
AD6528
AD6529
AD6720
NOR
NOR
NOR
NOR
NOR
NOR
Anyka AK3223
AK3224
NAND
NAND
SKY CX80502
CX80203
NOR
NOR
SI SI4901
SI4904
NOR
NOR
TI D751685
D751749
NOR
NOR
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


Package Contains :
  • 1 x Volcano Box
  • 2 x cables:
  1. Main cable
  2. USB cable
  • 32 x Pin Finder Adapter Cables
  1. P-08A
  2. P-05B
  3. P-03B
  4. P-10C
  5. P-10A
  6. P-07A
  7. P-04B
  8. P-04A
  9. P-10B
  10. P-05A
  11. P-03A
  12. P-18B
  13. P-16A
  14. P-20B
  15. P-16B
  16. P-20D
  17. P-18A
  18. P-20C
  19. P-24A
  20. P-30A
  21. P-30B
  22. P-12B
  23. P-14F
  24. P-12A
  25. P-14E
  26. P-14G
  27. P-14D
  28. P-14H
  29. P-12C
  30. P-10D
  31. P-14C
  32. Multi Purpose Board

 

* Contenido del paquete de venta puede variar y cambiar sin notificación.

 


Haz tu página web gratis Webnode